Advertisement

Quantitative and qualitative comparisons of pulp cavity volumes produced by cone beam computed tomography and micro-computed tomography through semiautomatic segmentation: An ex vivo investigation

Published:October 20, 2022DOI:https://doi.org/10.1016/j.oooo.2022.10.004

      Objective

      The aim of this study was to measure the volume and visually assess 3-dimensional (3D) virtual models of pulp cavities obtained through semiautomatic segmentation on images from 6 cone beam computed tomography (CBCT) units compared with the reference standard of micro-CT.

      Study Design

      Fifteen mandibular premolar teeth were scanned with 6 CBCT units: Prexion 3D Elite, i-CAT Next Generation, NewTom 5G, Cranex 3D, 3Shape X1, and Orthophos SL 3D, using the smallest available field of view and highest resolution settings. Pulp cavity volumes were quantitatively assessed by 2 calibrated examiners. The volumes from each CBCT unit were compared with micro-CT. Qualitative assessment of the 3D reconstructions was also performed. Repeated-measures analysis of variance and the Friedman test compared the CBCT reconstructions to micro-CT. Intra- and interexaminer agreements were calculated with the intraclass correlation coefficient and kappa statistic.

      Results

      The CBCT-based volumes were all significantly larger than micro-CT (P ≤ .0061). Prexion, X1, and Orthophos provided the segmentations that most closely resembled the reference standard. Intra- and interexaminer agreements ranged from good to excellent for quantitative measurements. Interexaminer agreement for qualitative evaluation was substantial.

      Conclusions

      Semiautomatic segmentation of CBCT images is a feasible method to produce virtual 3D models of the pulp cavity. Prexion, X1, and Orthophos were the CBCT units that resulted in 3D reconstructions most similar to the reference standard.
      To read this article in full you will need to make a payment

      Purchase one-time access:

      Academic & Personal: 24 hour online accessCorporate R&D Professionals: 24 hour online access
      One-time access price info
      • For academic or personal research use, select 'Academic and Personal'
      • For corporate R&D use, select 'Corporate R&D Professionals'

      References

        • Caputo BV
        • Noro Filho GA
        • de Andrade Salgado DM
        • Moura-Netto C
        • Giovani EM
        • Costa C
        Evaluation of the root canal morphology of molars by using cone-beam computed tomography in a Brazilian population: part I.
        J Endod. 2016; 42: 1604-1607
        • Durack C
        • Patel S.
        Cone beam computed tomography in endodontics.
        Braz Dent J. 2012; 23: 179-191
        • Estrela C
        • Bueno MR
        • Leles CR
        • Azevedo B
        • Azevedo JR.
        Accuracy of cone beam computed tomography and panoramic and periapical radiography for detection of apical periodontitis.
        J Endod. 2008; 34: 273-279
        • Reymus M
        • Fotiadou C
        • Kessler A
        • Heck K
        • Hickel R
        • Diegritz C.
        3D printed replicas for endodontic education.
        Int Endod J. 2019; 52: 123-130
        • Panmekiate S
        • Ngonphloy N
        • Charoenkarn T
        • Faruangsaeng T
        • Pauwels R.
        Comparison of mandibular bone microarchitecture between micro-CT and CBCT images.
        Dentomaxillofac Radiol. 2015; 4420140322
        • Maret D
        • Telmon N
        • Peters OA
        • et al.
        Effect of voxel size on the accuracy of 3D reconstructions with cone beam CT.
        Dentomaxillofac Radiol. 2012; 41: 649-655
        • Jacobs R
        • Salmon B
        • Codari M
        • Hassan B
        • Bornstein MM.
        Cone beam computed tomography in implant dentistry: recommendations for clinical use.
        BMC Oral Health. 2018; 18: 88
        • Aanenson JW
        • Till JE
        • Grogan HA.
        Understanding and communicating radiation dose and risk from cone beam computed tomography in dentistry.
        J Prosthet Dent. 2018; 120: 353-360
        • Jacobs R.
        Dental cone beam CT and its justified use in oral health care.
        JBR-BTR. 2011; 94: 254-265
        • Yel I
        • Booz C
        • Albrecht M
        • et al.
        Optimization of image quality and radiation dose using different cone-beam CT exposure parameters.
        Eur J Radiol. 2019; 116: 68-75
        • Pauwels R
        • Araki K
        • Siewerdsen JH
        • Thongvigitmanee SS.
        Technical aspects of dental CBCT: state of the art.
        Dentomaxillofac Radiol. 2015; 4420140224
        • Clark DP
        • Badea CT.
        Micro-CT of rodents: State-of-the-art and future perspectives.
        Phys Med. 2014; 30: 619-634
        • Swain MV
        • Xue J.
        State of the art of Micro-CT applications in dental research.
        Int J Oral Sci. 2009; 1: 177-188
        • Versiani MA
        • Pecora JD
        • Sousa-Neto MD.
        The anatomy of two-rooted mandibular canines determined using micro-computed tomography.
        Int Endod J. 2011; 44: 682-687
        • Grande NM
        • Plotino G
        • Pecci R
        • Bedini R
        • Pameijer CH
        • Somma F.
        Micro-computerized tomographic analysis of radicular and canal morphology of premolars with long oval canals.
        Oral Surg Oral Med Oral Pathol Oral Radiol Endod. 2008; 106: e70-e76
        • Sousa TO
        • Haiter-Neto F
        • Nascimento EHL
        • Peroni LV
        • Freitas DQ
        • Hassan B.
        Diagnostic accuracy of periapical radiography and cone-beam computed tomography in identifying root canal configuration of human premolars.
        J Endod. 2017; 43: 1176-1179
        • Tolentino ES
        • Amoroso-Silva PA
        • Alcalde MP
        • et al.
        Limitation of diagnostic value of cone-beam CT in detecting apical root isthmuses.
        J Appl Oral Sci. 2020; 28e20190168
        • De Moor R
        • Hülsmann M
        • Kirkevang L
        • Tanalp J
        • Whitworth J.
        Undergraduate curriculum guidelines for endodontology.
        Int Endod J. 2013; 46: 1105-1114
        • DeWald JP.
        The use of extracted teeth for in vitro bonding studies: A review of infection control considerations.
        Dent Mater. 1997; 13: 74-81
        • Michetti J
        • Georgelin-Gurgel M
        • Mallet JP
        • Diemer F
        • Boulanouar K.
        Influence of CBCT parameters on the output of an automatic edge-detection-based endodontic segmentation.
        Dentomaxillofac Radiol. 2015; 4420140413
        • Galibourg A
        • Dumoncel J
        • Telmon N
        • Calvet A
        • Michetti J
        • Maret D.
        Assessment of automatic segmentation of teeth using a watershed-based method.
        Dentomaxillofac Radiol. 2018; 4720170220
        • Wang L
        • Li JP
        • Ge ZP
        • Li G.
        CBCT image based segmentation method for tooth pulp cavity region extraction.
        Dentomaxillofac Radiol. 2019; 4820180236
        • Shrout PE
        • Fleiss JL.
        Intraclass correlations: uses in assessing rater reliability.
        Psychol Bull. 1979; 86: 420-428
        • Weissheimer A
        • Menezes LM
        • Sameshima GT
        • Enciso R
        • Pham J
        • Grauer D.
        Imaging software accuracy for 3Dimensional analysis of the upper airway.
        Am J Orthod Dentofacial Orthop. 2012; 142: 801-813
        • Gulsahi A
        • Kulah CK
        • Bakirarar B
        • Gulen O
        • Kamburoglu K.
        Age estimation based on pulp/tooth volume ratio measured on cone-beam CT images.
        Dentomaxillofac Radiol. 2018; 4720170239
        • Hassan B
        • Couto Souza P
        • Jacobs R
        • de Azambuja Berti S
        • van der Stelt P
        Influence of scanning and reconstruction parameters on quality of three-dimensional surface models of the dental arches from cone beam computed tomography.
        Clin Oral Investig. 2010; 14: 303-310
        • Fourie Z
        • Damstra J
        • Schepers RH
        • Gerrits PO
        • Ren Y.
        Segmentation process significantly influences the accuracy of 3D surface models derived from cone beam computed tomography.
        Eur J Radiol. 2012; 81: e524-e530
        • Sönmez G
        • Koç C
        • Kamburoğlu K.
        Accuracy of linear and volumetric measurements of artificial ERR cavities by using CBCT images obtained at 4 different voxel sizes and measured by using 4 different software: an ex vivo research.
        Dentomaxillofac Radiol. 2018; 4720170325
        • Fakhar HB
        • Mallahi M
        • Panjnoush M
        • Kashani PM.
        Effect of voxel size and object location in the field of view on detection of bone defects in cone beam computed tomography.
        J Dent (Tehran). 2016; 13: 279-286
        • Torres MG
        • Campos PS
        • Segundo NP
        • Navarro M
        • Crusoe-Rebello I.
        Accuracy of linear measurements in cone beam computed tomography with different voxel sizes.
        Implant Dent. 2012; 21: 150-155
        • Al-Rawi B
        • Hassan B
        • Vandenberge B
        • Jacobs R.
        Accuracy assessment of three-dimensional surface reconstructions of teeth from cone beam computed tomography scans.
        J Oral Rehabil. 2010; 37: 352-358
        • Damstra J
        • Fourie Z
        • Huddleston Slater JJ
        • Ren Y
        Accuracy of linear measurements from cone-beam computed tomography-derived surface models of different voxel sizes.
        Am J Orthod Dentofacial Orthop. 2010; 137 (e1-17): 16
        • Rodrigues AF
        • Campos MJ
        • Chaoubah A
        • Fraga MR
        • Farinazzo Vitral RW
        Use of gray values in CBCT and MSCT images for determination of density: influence of variation of FOV size.
        Implant Dent. 2015; 24: 155-159
        • Katsumata A
        • Hirukawa A
        • Okumura S
        • et al.
        Effects of image artifacts on gray-value density in limited-volume cone-beam computerized tomography.
        Oral Surg Oral Med Oral Pathol Oral Radiol Endod. 2007; 104: 829-836
        • Schulze R
        • Heil U
        • Gross D
        • et al.
        Artefacts in CBCT: a review.
        Dentomaxillofac Radiol. 2011; 40: 265-273
        • Spin-Neto R
        • Gotfredsen E
        • Wenzel A.
        Variation in voxel value distribution and effect of time between exposures in six CBCT units.
        Dentomaxillofac Radiol. 2014; 4320130376
        • Ballrick JW
        • Palomo JM
        • Ruch E
        • Amberman BD
        • Hans MG.
        Image distortion and spatial resolution of a commercially available cone-beam computed tomography machine.
        Am J Orthod Dentofacial Orthop. 2008; 134: 573-582
        • Spin-Neto R
        • Gotfredsen E
        • Wenzel A.
        Impact of voxel size variation on CBCT-based diagnostic outcome in dentistry: a systematic review.
        J Digit Imaging. 2013; 26: 813-820
        • Marroquin Penaloza TY
        • Karkhanis S
        • Kvaal SI
        • et al.
        Reliability and repeatability of pulp volume reconstruction through three different volume calculations.
        J Forensic Odontostomatol. 2016; 34: 35-46
        • Grande NM
        • Plotino G
        • Gambarini G
        • et al.
        Present and future in the use of micro-CT scanner 3D analysis for the study of dental and root canal morphology.
        Ann 1st Super Sanita. 2012; 48: 26-34
        • Paes da Silva Ramos Fernandes LM
        • Rice D
        • Ordinola-Zapata R
        • et al.
        Detection of various anatomic patterns of root canals in mandibular incisors using digital periapical radiography, 3 cone-beam computed tomographic scanners, and micro-computed tomographic imaging.
        J Endod. 2014; 40: 42-45
        • Yüzügüllü B
        • Gulsahi A
        • Imirzalioglu P.
        Radiomorphometric indices and their relation to alveolar bone loss in completely edentulous Turkish patients: a retrospective study.
        J Prosthet Dent. 2009; 101: 160-165
        • Markvart M
        • Bjorndal L
        • Darvann TA
        • Larsen P
        • Dalstra M
        • Kreiborg S.
        Three-dimensional analysis of the pulp cavity on surface models of molar teeth, using X-ray micro-computed tomography.
        Acta Odontol Scand. 2012; 70: 133-139
        • Queiroz PM
        • Rovaris K
        • Santaella GM
        • Haiter-Neto F
        • Freitas DQ.
        Comparison of automatic and visual methods used for image segmentation in Endodontics: a microCT study.
        J Appl Oral Sci. 2017; 25: 674-679
        • Michetti J
        • Basarab A
        • Diemer F
        • Kouame D.
        Comparison of an adaptive local thresholding method on CBCT and microCT endodontic images.
        Phys Med Biol. 2017; 63015020